恒泰源聚氨酯

Nos especializamos en poliuretano para suela de calzado

>
>
>
中高密度中硬度聚氨酯鞋底原液ZG-P-8130/ZG-I-8260

中高密度中硬度聚氨酯鞋底原液ZG-P-8130/ZG-I-8260

Código de producto
Cantidad
-
+
Inventario:
Product description
Parámetro

中硬度中高密度聚氨酯耐寒鞋鞋底原液

牌号(Shop sign): ZG-P-8130/ZG-I-8260

耐寒鞋鞋底原液

PU Resin for shoe sole of cold-resistant shoes

1. 特性:中硬度,中高密度。耐寒,半耐寒。

Characteristic: Medium hardness, medium and low density, cold resistance and semi cold resistance

2. 用途:适用于耐寒,半耐寒男女鞋底的生产。

Application: Applicable to the production of cold-resistant and half hardy soles for both men and women shoes

3. 原液特性Typical properties of PU Resin

3. 原液特性Typical properties of PU Resin

品  名

Name of products

外   观

Appearance

粘   度Viscosity(Pa·s/50℃) 密   度Density(g/cm3/40℃) 包  装Package(kg)
ZG-P-8130 白色或淡黄,液状无异物White or pale yellow, liquid, no foreign material 1.00-1.40 1.16-1.20 18
ZG-I-8260 透明液体无异物Transparent liquid, no foreign materials 0.20-0.40 1.18-1.20 20

参考发货配比(Reference shipments ratio):A/B=30/24(桶)

Reference shipments ratio: A/B=30/24(barrel)

4. 成型条件及物性值(Molding conditions & physical properties): 

测试项目Test item 参考物性值Reference physical properties
鞋底成型密度Molded density of sole(g/cm3 0.25~0.65
硬度(A型)Hardness (type A) 35~65
拉伸强度Tensile strength(MPa) 3.5~4.5
伸长率Elongation(%) 250~550
NBS耐磨NBS abrasion resistance (%) ≥10%
自由泡密度Free foam density(g/cm3 0.15~0.35
耐折性(常温)(4万次裂口长度,mm)Folding endurance (room temperature)(40,000 gap length mm) <8

●配合比率是以最佳配比值为基础,此配比值会随添加的颜料助剂种类和添加量不同而变化。

Matching ratio is based on the optimal matching value which will vary with the category and additive amount of paint additives added.

●自由泡沫密度会依季节(温度,湿度)的不同而变化。

Free foam density will vary with the seasons (temperature, humidity).

●脱模时间会随成型品厚度的增加而延长。

Stripping time will be extended with the increase of the thickness of moldings.

●耐折条件:屈挠角度为 90度,频率为80次/min*4万次。

Folding endurance conditions: bending angle is 90 degrees and the frequency is 80 times / min * 40 thousand times

● 以上数据仅作参考,具体数据以实际操作为准。如需其他物性指标,请与我公司联系。

Data listed above is just for reference. The specific data is subjected to the practical operation. If other physical properties are required, please contact us.

No se encontró el grupo de parámetros correspondiente. Agréguelo en la plantilla de propiedades de fondo.
Anterior

Dirección:

Parque científico y tecnológico, no. 1 road, industrial park, wenling, zhejiang

       

EN      PT
中文    RU

Copyright © Zhejiang Hengtaiyuan Polyurethane Co., Ltd.  浙ICP备20019453号 

中文 |EN | PT | ES | RU

搜索
Búsqueda

+86-13575886789